Mascara coloring pages

Published at Friday, 27 March 2020.

You will need any of these tools in painting your exterior: caulk, sandpaper, rags and/or paper towels, painter's tape, garden hose, power washer, or hose brush attachment, sponges & buckets for wash water, spray nozzle, stepladder, extension ladder, paint scraper, wire brush, putty knives, heat gun, rotary paint removing tool and electric drill, caulk gun, sanding block, and work gloves. OK, let's get started. Step one...supplies. You need a flat brush, a fan, a small detail brush and a couple of Filberts. A filbert is a rounded edge brush that lets you maneuver the paint easily without going outside the edges. Ultimately buy brushes that you like though, and make them work. Fans allow you to blend, for example. I use fans a lot and it's how I graduate color throughout my images. Everything I paint is by hand....no airbrushing or assistants. I want it to be an expression of me and nobody else. You also need an oil painting medium to mix with the oil paint to make it more fluid, and to speed or slow the drying process. Whichever you prefer. Go to the art store and don't be afraid to ask for help....they'll love helping you! A medium is merely an additive liquid which increases gloss, makes it flow easily, preserves the finish over time, keeps it from yellowing. I personally love Galkyd and Galkyd Lite. If that isn't available, buy a medium that looks like liquid amber and is kind of thick. Don't buy watery looking mediums....too hard to work with. Painting trim is normally done by roller and brush, not sprayed, so more manual labor is required painting trim, and most cases costing 60% of the total exterior painting job.

You can use vinyl on almost any exterior except previously painted wood. It works fine on wood shingles and shakes, asbestos shingles, brick, stucco, concrete and masonry blocks. One manufacturer says you can even put it on wood clapboard if the clapboard is new and unprimed. To design a look with analogous colors, you can have any three colors next to each other on the color wheel. Successfully combining these colors in a room is one of the easiest, next to using monochromatic colors. In general you will want your design to use similar tones throughout the room except in the case of accent colors, which may be bolder. Materials and their application, every paint manufacturers paint will vary. If you are freshening up old walls and painting back to the existing color, the product doesn't have to be high end or have good coverage. If you need to paint a dark color over light color or light color over dark, you may want to consider purchasing a top quality paint to avoid multiple coats. I suggest Valspar, Pittsburgh or Benjamin Moore top of the line wall paint. These brands work well for straight out of the bucket use and are application friendly. Sherwin Williams is not my first choice because the coverage is poor and you will have to apply multiple coats but, it does apply, fluently. If you find a product does not apply well, maybe it is to heavy and/or sagging on the wall, you may need to thin the paint with a little water, this will reduce the coverage but make the paint flow better and lay down nicer on the surface. I do recommend latex paints for all applications, these days a good high end latex is as good as oil paint and your tools clean up much easier, it will also be less harsh on the respiratory system. The only situation I recommend oil paint, is as a primer/stain blocker over stains that "bleed" through the paint. You can get a stain blocking oil primer in a convenient spray can and spot prime any trouble areas before painting and in the case you need to prime all of the wall due to smoke or water damage, I recommend getting it in gallons and rolling it on where the stains are present. Don't forget proper ventilation and/or a respirator when using the oil based primers! Intensity refers to a colors brightness or saturation. Intensity refers to how pure a color is. For instance, if you were to use cadmium red straight from the tube, it would have a high intensity. If you were to mix it with another color however, its intensity would be diminished.

Leave a Reply